Charger Battery (Batre) 18650

 

Jiika arus listrik diibaratkan air...

arus 3 Ampere dari charger hape

dibagikan ke 6 batre .. 

jadi maksimum kecepatan arusnya antara 100-500 mili Ampere tiap batre yg ditrima.

...

3 jam penuh

auto cutOFF

pada tegangan maksimum 4.2 volt 

pada batre 18650

TP4056 Module Features & Technical Specs:

Over Current Protection

Output charging current can be controlled or adjusted from a single resistor

General Micro USB Female Connector

Battery Charging Indication LED

Battery full Charged Indication LED

Battery auto cutoff from the charging circuit when fully charged

Soft Start Charging

It can charge any size of 3.7V Li-ion cell

Low cost and reliable Li-ion battery charger

Battery temperature measurement inside (Disconnect charging when temperature of the battery goes high than normal)

Can connected to any USB port with a USB cable

 

TP4056 Charging Module Explained / Description:

TP4056 module is a very efficient 3.7V single li ion cell or lithium ion cell charging module. It can not only charge 18650 cell but a wide variety of different sized and kinds of 3.7V li ion batteries. The heart of the module is a TP4056 IC that is an advanced lithium battery charging IC. The IC is built and internally programed to provide efficient charging to a li ion cell which increases the cell back up and life.

The IC also has a temperature input pin from which we can connect a temperature sensor NTC type. The temperature sensor must be attached with the body of the battery to detect the temperature of the battery while charging. The IC is also programed to disconnect the charging when the battery temperature goes above from a limit set inside the IC’s program. The module is also having two indicators LEDs also marked in the module pinout & details above. One LED indicates the battery charging in progress and when the battery become full charged it automatically gets deactivated and the another LED will become activated to indicate that the battery is fully charged.

....

Applications:

Solar Chargers

Digital Cameras

Portable Home Appliances

Power Banks

Cell Phones & Tablets

Where TO Use:

TP4056 li ion battery charger module can be used anywhere where you are using portable devices with li ion batteries. For example it can be used to make solar power banks and it can also be used in your electronics projects. Moreover it can also be used as a charger or alternative charger for cell phones, digital cameras and other portable devices.

 

How TO Use:

Using TP4056 module is very simple for providing input power to the circuit you can use a 5V 2A charger or you can also connect it with any USB outlet. Alternatively you can also connect a 5V 2A supply with the input terminals of the module.

After connecting the supply connect the 3.7V lithium ion cell you want to charge with the battery connections points shown in the image above. The li ion cell should be connected in right polarity or the cell or charger may damage.

Datasheet:

To Download the datasheet just copy and paste the below link in your browser.

https://pdf1.alldatasheet.com/datasheet-pdf/view/1132405/ASIC/TP4056.html